IS 10424 : 1982 — Guide for design and use of printed boards

What is IS 10424 : 1982?

IS 10424 : 1982 is an Indian Standard published by the Bureau of Indian Standards (BIS) under the title Guide for design and use of printed boards. It falls under the <strong>Electronic and Telecom equipments, components and devices</strong> group. Certification under this standard is voluntary.

How to get certified for IS 10424 : 1982

1. 1
   Apply online — Submit the BIS portal application with product details, factory information, and test reports.
2. 2
   Lab testing — Submit product samples to a BIS-recognised testing laboratory for evaluation against the standard.
3. 3
   Factory inspection — A BIS officer visits your manufacturing facility to verify quality control systems.
4. 4
   Licence grant — On approval, BIS issues the licence. You may then affix the ISI Mark on compliant products.

Related Indian Standards

• IS 13984Link and Test Connectors:Part 1 Test Schedule and Requirements
• IS/IEC 60603 : Part 2 : 1995Connectors for frequencies below 3 MHz for use with printed boards – Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2.54 mm (0.1 in) with common mounting features
• IS/IEC 60603 : Part 3 : 1987Connectors for frequencies below 3 MHz for use with printed boards Part 3: Two-part connectors for printed boards having contacts spaced at 2.54 mm(0.100 in)centres and staggered terminations at that same spacing
• IS/IEC 60603 : Part 4 : 1987Connectors for frequencies below 3 MHz for use with printed boards Part 4: Two-part connectors for printed boards having contacts spaced at 1.91 mm ( 0.075 in )centres and staggered terminations at that same spacing
• IS/IEC 60603 : Part 8 : 1990Connectors for frequencies below 3 MHz for use with printed boards Part 8: Two-part connectors for printed boards for basic grid of 2.54 mm (0.1 in), with square male contacts of 0.63 mm x 0.63 mm
• IS/IEC 60730 : PART 1 : 1999Automatic electrical controls for household and similar use : part 1 General Requirements
• IS/IEC 61076 : Part 4 : Sec 100 : 2001Connectors for electronic equipment Part 4-100: Printed board connectors with assessed quality Detail specification for two-part connector modules having a grid of 2.5 mm for printed boards and backplanes
• IS/IEC 61076 : Part 4 : Sec 101 : 2001Connectors for electronic equipment Part 4-101: Printed board connectors with assessed quality Detail specification for two-part connector modules having a basic grid of 2.0 mm for printed boards and backplanes in accordance with IEC 60917
• IS/IEC 61076 : Part 4 : Sec 102 : 1997Connectors with assessed quality for use in d.c., low-frequency analogue and in digital high speed data applications – Part 4: Printed board connectors – Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917
• IS/IEC 61076 : Part 4 : Sec 108 : 2002Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality -Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2.5 mm in accordance with IEC 60917-1
• IS/IEC 61076 : Part 4 : Sec 113 : 2002Connectors for electronic equipment – Printed board connectors – Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2.54 mm for printed boards and backplanes in bus applications