IS 1230 : 1979 — Cast iron rainwater pipes and fittings

What is IS 1230 : 1979?

IS 1230 : 1979 is an Indian Standard published by the Bureau of Indian Standards (BIS) under the title Cast iron rainwater pipes and fittings.. Certification under this standard is voluntary.

How to get certified for IS 1230 : 1979

1. 1
   Apply online — Submit the BIS portal application with product details, factory information, and test reports.
2. 2
   Lab testing — Submit product samples to a BIS-recognised testing laboratory for evaluation against the standard.
3. 3
   Factory inspection — A BIS officer visits your manufacturing facility to verify quality control systems.
4. 4
   Licence grant — On approval, BIS issues the licence. You may then affix the ISI Mark on compliant products.

Related Indian Standards

• IS 10299Specification for cast iron saddle pieces for service connection from asbestos cement pressure pipes
• IS 1742Code of practice for building drainage (second revision)
• IS 2527Code of practice for fixing rainwater gutters and downpipes for roof drainage (First Revision)
• IS 3005Specification for grey cast iron ingot moulds, stools and slag ladles: Part 1 bottom stools for large size ingot moulds weighing 8 tonnes and higher (First Revision)
• IS 3005Specification for grey cast iron ingot moulds, stools and slag laddles: Part 3 grey cast iron ingot moulds of mass more than one tonne and up to eight tonnes (First Revision)
• IS 3005Specification for grey cast iron ingot moulds, stools and slag ladles: Part 2 grey cast iron ingot moulds of mass more than eight tonnes (First Revision)
• IS 7925Specification for low alloy types of abrasion - Resistant iron castings
• IS 8350Deviations for untoleranced dimensions of spheroidal or nodular graphite iron castings
• IS 8593Recommendations for centralised lubrication as applied to plant and machinery: Part 1 oil lubrication (First Revision)
• IS 8593 (Part 1)Recommendations for Centralised Lubrication as Applied to Plant and Machinery : Part 1 Oil Lubrication
• IS 8717Code of practice for packaging of cast iron pipes and fittings of 150 mm diameter and below
• SP 35 (S&T) : 1987Handbook on Water Supply and Drainage (with Special Emphasis on Plumbing)
• SP 62 : 1997Handbook on causes and prevention of cracks in buildings