IS 14714 : 2024 — Geotextiles - Determination of abrasion resistance (first revision)

What is IS 14714 : 2024?

IS 14714 : 2024 is an Indian Standard published by the Bureau of Indian Standards (BIS) under the title Geotextiles - Determination of abrasion resistance (first revision). It falls under the <strong>Textile, Textile Products and Machinery</strong> group. Certification under this standard is voluntary.

How to get certified for IS 14714 : 2024

1. 1
   Apply online — Submit the BIS portal application with product details, factory information, and test reports.
2. 2
   Lab testing — Submit product samples to a BIS-recognised testing laboratory for evaluation against the standard.
3. 3
   Factory inspection — A BIS officer visits your manufacturing facility to verify quality control systems.
4. 4
   Licence grant — On approval, BIS issues the licence. You may then affix the ISI Mark on compliant products.

Related Indian Standards

• IS 16190Agro textiles - High density polyethylene (HDPE) laminated woven lay flat tube for irrigation purpose - Specification
• IS 16362Geosynthetics - Geotextiles for Subsurface Drainage, Subgrade Separation, Subgrade Stabilization, Filtration and Erosion Control (In Hard Armor Systems) Applications - Specification (second revision)
• IS 16627Agro textiles – High density polyethylene (HDPE) laminated woven lay flat tube for use in mains and submains of drip irrigation system – Specification
• IS 16653Geosynthetics - Needle punched nonwoven geobags for coastal and waterways protection - Specification
• IS 16654Geosynthetics - Polypropylene multifilament woven geobags for coastal and waterways protection - Specification
• IS 17374Geosynthetics – Reinforced HDPE membrane for effluents and chemical resistance lining – Specification
• IS 17728Agro Textiles - High Density Polyethylene (HDPE) Laminated Woven Lay Flat Tube and Fittings for use in Rain Irrigation System - Specification
• IS 18057Woodworking machines Safety Part 8: Belt sanding and calibrating machines for straight workpieces
• IS 18057Woodworking Machines Safety Part 6: Single Spindle Vertical Moulding Machines Toupies
• IS 18057Woodworking machines Safety Part 9: Circular Saw Benches with and without sliding table
• IS 18057Woodworking machines Safety Part 2: Horizontal beam panel circular sawing Machines
• IS 18057Woodworking Machines Safety Part 7: Surface Planing Thickness Planing Combined SurfaceThickness Planing Machines
• IS 18057Woodworking Machines Safety Part 5: Dimension Saws
• IS 18057Woodworking Machines Safety Part 10: Building Site Saws Contractor Saws
• IS 18057Woodworking Machines Safety Part 4: Vertical Panel Circular Sawing Machines
• IS 19104Geosynthetics - Geotextile Tubes for Coastal and Waterways Protection - Specification
• IS 14706Geosynthetics - Sampling and preparation of test specimens (first revision)
• IS 18185Katuka Picrorrhiza kurroa Royle ex Benth Rhizome for use in Traditional Medicine Specification
• IS 1969Textiles — Tensile Properties of Fabrics Part 1 Determination of Maximum force and Elongation at Maximum Force Using the Strip Method ( Fourth Revision )