IS 6171 : 1992 — Screwing taps - Technical supply conditions (Second Revision)

What is IS 6171 : 1992?

IS 6171 : 1992 is an Indian Standard published by the Bureau of Indian Standards (BIS) under the title Screwing taps - Technical supply conditions (Second Revision). It falls under the <strong>Gases, Gas Cylinders , Machine tools and other mechanical products</strong> group. Certification under this standard is voluntary.

How to get certified for IS 6171 : 1992

1. 1
   Apply online — Submit the BIS portal application with product details, factory information, and test reports.
2. 2
   Lab testing — Submit product samples to a BIS-recognised testing laboratory for evaluation against the standard.
3. 3
   Factory inspection — A BIS officer visits your manufacturing facility to verify quality control systems.
4. 4
   Licence grant — On approval, BIS issues the licence. You may then affix the ISI Mark on compliant products.

Amendments to IS 6171 : 1992

Related Indian Standards

• IS 6175Screwing taps: Part 1 Hand and short machine screwing taps for ISO metric screw threads sizes ml to m2.5 -- Specification (second revision)
• IS/ISO 25539 : Part 1 : 2017Cardiovascular implants - Endovascular devices: Part 1 endovascular prostheses (First Revision)
• IS/ISO 27427 : 2013Anaesthetic and Respiratory Equipment - Nebulizing Systems and Components
• IS/ISO 7198 : 2016Cardiovascular Implants and Extracorporeal Systems Vascular Prostheses Tubular Vascular Grafts and Vascular Patches
• IS 10952Recommendations for drills for use prior to tapping screw threads
• IS 1501Method For Vickers Hardness Test for Metallic Materials
• IS 1570Schedule for wrought steels: Part 7 steels for elevated temperature service (Creep Resistant Steels)
• IS 2473Dimensions for centre holes (First Revision)
• IS 2643Pipe threads where pressure - Tight joints are not made on the threads - Dimensions, tolerances and designation (Third Revision)
• IS 4218ISO Metric screw threads Part V Tolerances
• IS 4218ISO Metric screw threads Part V Tolerances
• IS 4218ISO Metric screw threads Part V Tolerances
• IS 4218ISO Metric screw threads Part V Tolerances
• IS 4218ISO Metric screw threads Part V Tolerances
• IS 4218ISO Metric screw threads Part V Tolerances
• IS 554Pipe threads where pressure - Tight joints are made on the threads - Dimensions, tolerances and designation (Fourth Revision)
• IS 6173Screwing taps -- Dimensions and tolerances on threaded portion: Part 1 For ISO metric screw threads (first revision)
• IS 6173Screwing taps -- Dimensions and tolerances of threaded portion: Part 2 For pipe screw threads G, Rp and Rc series
• IS 6175Screwing taps: Part 8 Screwing taps for pipe threads taper rc series -- Specification
• IS 6175Screwing taps: Part 6 Screwing taps for pipe threads parallel g series -- Specification
• IS 6175Screwing taps: Part 4 Long shank machine screwing taps for ISO metric screw threads sizes from m3 to m24 -- Specification
• IS 6175Screwing taps: Part 3 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches and m3 to m100 with fine pitches -- Specification (second revision)
• IS 6175Screwing taps: Part 2 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m10 -- Specification (second revision)
• IS 6175Screwing taps: Part 5 Nut screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches -- Specification

+ 3 more references