SP 36 : Part 2 : 1988 — Compendium of Indian Standards on Soil Engineering: Part-2 Field Testing of Soils For Civil Engineering Purposes

What is SP 36 : Part 2 : 1988?

SP 36 : Part 2 : 1988 is an Indian Standard published by the Bureau of Indian Standards (BIS) under the title Compendium of Indian Standards on Soil Engineering: Part-2 Field Testing of Soils For Civil Engineering Purposes. It falls under the <strong>Civil Engineering Design and Construction</strong> group. Certification under this standard is voluntary.

How to get certified for SP 36 : Part 2 : 1988

1. 1
   Apply online — Submit the BIS portal application with product details, factory information, and test reports.
2. 2
   Lab testing — Submit product samples to a BIS-recognised testing laboratory for evaluation against the standard.
3. 3
   Factory inspection — A BIS officer visits your manufacturing facility to verify quality control systems.
4. 4
   Licence grant — On approval, BIS issues the licence. You may then affix the ISI Mark on compliant products.

Related Indian Standards

• IS 10042Code of practice for site investigations for foundation in gravel - Boulder deposit
• IS 10108Code of practice for sampling of soils by thin wall sampler with stationary piston
• IS 10379Code of practice for field control of moisture and compaction of soils for embankment and subgrade
• IS 10442Earth-Augers Spiral Type - Specification (First Revision)
• IS 10589Specification for equipment for subsurface sounding of soils
• IS 11593Shear Box (Large) for Testing of Soils ? Specification (First Revision)
• IS 11594Mild Steel Thin Walled Sampling Tubes and Sampler Heads ? Specification (First Revision)
• IS 1725STABILIZED SOIL BLOCKS USED IN GENERAL BUILDING CONSTRUCTION SPECIFICATION
• IS 1888Method of load test on soils (Second Revision)
• IS 1892Subsurface investigation for foundations — Code of practice (second revision)
• IS 2131Standard Penetration Test of Soil - Method of Test
• IS 2132Code of Practice for Thin-Walled Tube Sampling of Soils (Second Revision)
• IS 2720Methods of test for soils: Part 33 Determination of the density in place by the ring and water replacement method
• IS 2720Methods of test for soils: Part 39 Direct shear test for soils containing gravel, Section 2 In-situ shear test
• IS 2720Methods of Test for soils: Part 31 Field Determination of California Bearing Ratio (First Revision)
• IS 2720Methods of test for soils: Part 28 determination of dry density of soils, in - Place, by the sand replacement method (First Revision)
• IS 2720Methods of test for soils: Part 29 determination of dry density of soils in - Place by the core - Cutter method (First Revision)
• IS 2720Methods of test for soils: Part 34 Determination of density of soil in-place by rubber-balloon method
• IS 4434Code Of Practice For In-situ Vane Shear Test For Soils
• IS 4968Method for subsurface sounding for soils: Part 1 dynamic method using 50 mm cone without bentonite slurry (First Revision)
• IS 4968Method for subsurface sounding for soils: Part 3 Static cone penetration test
• IS 4968Method for subsurface sounding for soils: Part 2 dynamic method using cone and bentonite slurry (First Revision)
• IS 8763Guide for undistrubed sampling of sands
• IS 9214Method of determination of modulus of subgrade reaction (K - Value) of soils in field

+ 1 more references